Jewelry Size Guide
Finding the right fit is easy! Use the guides below to determine the correct size for your ring, bangle, cuff, or bypass cuff.
Ring Sizing
Option 1: Measure an Existing Ring
- Choose a ring that fits the intended finger.
- Measure the inside diameter of the ring in millimeters.
- Match the measurement to the chart below.
| US Ring Size | Inside Diameter (mm) |
|---|---|
| 5 | 15.7 |
| 6 | 16.5 |
| 7 | 17.3 |
| 8 | 18.1 |
| 9 | 18.9 |
| 10 | 19.8 |
Option 2: Measure Your Finger
- Wrap a strip of paper or string around your finger.
- Mark where the ends meet.
- Measure the length in millimeters.
- Compare it to the chart below.
| US Ring Size | Finger Circumference (mm) |
|---|---|
| 5 | 49.3 |
| 6 | 51.9 |
| 7 | 54.4 |
| 8 | 57.0 |
| 9 | 59.5 |
| 10 | 62.1 |
Tip: Measure your finger at the end of the day when fingers are at their largest.
Bangle Sizing
How to Measure Your Hand
- Tuck your thumb across your palm as if putting on a bangle.
- Measure around the widest part of your hand using a flexible measuring tape.
- Compare your measurement to the chart below.
| Bangle Size | Inside Diameter | Fits Hand Circumference* |
|---|---|---|
| Small | 2.3" (58 mm) | Up to 7.5" (19 cm) |
| Medium | 2.5" (64 mm) | 7.5"–8.25" (19–21 cm) |
| Large | 2.7" (69 mm) | 8.25"–9" (21–23 cm) |
Cuff Size Guide
Cuffs are designed to slide onto the wrist through the opening and may be gently adjusted for a comfortable fit.
| Size | Recommended Wrist Size |
|---|---|
| Small | 5.75"–6.25" |
| Medium | 6.25"–6.75" |
| Large | 6.75"–7.25" |
Measure your wrist where you normally wear your bracelet using a flexible measuring tape. Don't have one? Wrap a piece of string or a strip of paper around your wrist, mark where the ends meet, then lay it flat and measure the length with a ruler.
How to Wear Your Cuff
- Turn your wrist sideways and slide the cuff onto the narrowest part of your wrist.
- Rotate the cuff into position so it sits comfortably where you normally wear it.
- If needed, make one small adjustment for the best fit, then leave it that size.
- Avoid repeatedly pulling the cuff open and closed, as this can weaken the metal over time.
Bypass Cuff Size Guide
Bypass cuffs feature overlapping ends and are slightly adjustable for comfort.
| Size | Recommended Wrist Size |
|---|---|
| Small | 5.75"–6.25" |
| Medium | 6.25"–6.75" |
| Large | 6.75"–7.25" |
Measure your wrist where you normally wear your bracelet using a flexible measuring tape. Don't have one? Wrap a piece of string or a strip of paper around your wrist, mark where the ends meet, then lay it flat and measure the length with a ruler.
How to Wear Your Bypass Cuff
- Turn your wrist sideways and slide the cuff onto the narrowest part of your wrist.
- Rotate the cuff into place so the decorative ends sit comfortably around the top of your wrist.
- The ends are designed to overlap slightly without touching, creating the signature bypass look.
- If needed, make one gentle adjustment for the perfect fit, then leave it at that size.
- Avoid repeatedly opening and closing the cuff, as this can weaken the metal over time.